Front Surround System EN Quick Start Guide
Contents Accessories ............................................... 3 En • This document explains connection of this unit to a computer, AV device, or TV that supports Audio Return Channel (ARC). See the Owner’s Manual for instructions on operating the unit. The Owner’s Manual is available from the following websites: Remote control ......................................... 4 U.S.A. and Canada https://uc.yamaha.com/support/ Installation ................................................
Accessories Make sure you have received all of the following accessories. The unit (ESB-1090) Remote control Power cord A CR2025 Lithium battery has already been inserted into the remote control. Optical digital audio cable Spacers (x 2/sheet) Mounting template Use when connecting the unit to a TV that does not support ARC. Use when mounting the unit on a wall. Use when mounting the unit on a wall. NOTE HDMI cables are not supplied with the unit. Use the HDMI cables purchased separately.
Remote control Preparing the remote control Operating range of the remote control Remove the battery insulating strip before attempting to use the remote control. Operate the remote control within the range as shown below.
Installation Connections Installing the unit on a TV stand Install the unit as shown below.
Connecting a computer or AV device If only a TV will be connected, skip this step and proceed to step .
Connecting the power cord After all connections are complete, connect the supplied power cord to the power connector on the unit and then plug the power cord into an AC wall outlet. Power connector To an AC wall outlet IMPORTANT • This unit is set to Conference mode (mode for using the unit as a speaker for remote conferencing) by default.
Yamaha Global Site U.S.A. and Canada https://uc.yamaha.com/ Other countries https://www.yamaha.com/ Yamaha Downloads U.S.A. and Canada https://uc.yamaha.com/support/ Other countries https://download.yamaha.