User Manual

14
Components
Depending on which system you’ve purchased, your Revolabs Executive Elite™
System package contains the following:
 Rack mountable 4 or 8 channel Base DSP Unit
 Remote Antenna receiver unit with mounting plate
 4 or 8 Microphone Charger Base with external Power Supply
 Power cable, USB cable, network cable
 Euroblock connectors
 Documentation
In addition, you might have bought one or more Revolabs Elite wireless
microphones. Each microphone package will include:
 Revolabs Elite wireless microphone (different styles)
 Lanyard and over-the-ear speaker element (wearable microphone only)
 Batteries
 Documentation
The Executive Elite Base DSP unit contains all the logic required to support the
audio signal from the microphones in the different output formats (analog
audio, digital audio over AVB). It supports the management interfaces (front
panel, local web UI, room control system UI), as well as communication with
the remote cloud based UI.
The Remote Antenna receiver contains all components required to receive (and
send) audio signals from (and to) the microphones. It includes the required
diversity antennas. The remote antenna also provides the scan of the RF
frequency to determine how many (additional) microphones might be used in
the area. The remote antenna receiver communicates with the Elite Base DSP
unit using a direct IP connection (Cat 5e or Cat 6 cable).
The Charger Base stores and charges the wireless Elite microphones when not
in use. Communication capabilities are not required for the charger tray
because all information transferred between microphones and the Elite base
DSP unit passes over the wireless connection. This includes pairing of
microphones to receivers, firmware updates of microphones, and commands
sent to the microphones.