User Manual

11
The command ‘regnotify’ listed above will turn on notifications. The following table
lists the notifications sent by the system.
Notifications
Notification Format
Description
mute_group_change
notify mute_group_change <group name>
<action>
Notify client that changes that affect a given group
have occurred. Actions include 'add' - add, 'del' -
delete, 'ren' - rename.
mute_group_member_change
notify mute_group_member_change
<group name> bid <box id> active <0/1> type
<type> index <mic index>
Notify client that a mic has changed its group.
mute_group_mute_type_change
notify mute_group_mute_type_change
<group name> <mute type>
Notify client that the given mute group's mute type
has changed,
0 - Individual mute, 1 - Tabletop mute,
2 - Push to talk.
property_change_audio_quality
notify property_change_audio_quality
<1/2>
Notify client that the audio quality setting has
changed,
1 - SD, 2 - HD.
property_change_back_channel_
audio
notify property_change_back_channel_audio
<0/1>
Notify client that the audio back channel setting is
changed,
0 - no back channel, 1 - back channel on.
property_change_eq_<eqX>
notify property_change_eq_<eqX>
ch<channel number> <value>
Notify client the given channel's eq value changed,
<eqX> - X can be 1/2/3/4, and <value> will range from
-10 db to +10 db.
property_change_gain
notify property_change_gain
ch<channel number> <gain>
Notify client the given microphone's input gain
changed, gain value range from -20 to 0 db.
property_change_hipass_filter
notify property_change_hipass_filter
ch<channel number> <frequency>
Notify client the given channel's high pass filter value
changed,possible frequency values include 0, 110,
140, 175 and 220 Hz.
property_change_legacy_mode
notify property_change_legacy_mode
<0/1>
Notify client that the legacy mode has changed,
0 - legacy off, 1 - legacy on.
property_change_lock
notify property_change_lock ch<channel
number> <0/1>
Notify client the given microphone's mute lock
changed,
0 - unlocked, 1 - locked.
property_change_lowpass_filter
notify property_change_lowpass_filter
ch<channel number> <frequency>
Notify client the given channel's low pass filter value
changed, possible frequency values include 0, 12000,
8000, and 4000 Hz.
property_change_output_level
notify property_change_output_level
ch<channel number> <0/1>
Notify client the given channel's output level changed,
0 - mic, 1 - line.
property_change_output_gain
notify property_change_output_gain ch1 -4
Notify client the given channel's output gain changed,
gain value
range from -20 db to 5db.
property_change_rf_auto_scaling
notify property_change_rf_auto_scaling
<0/1>
Notify client that the RF auto scaling setting is
changed,
0 - off, 1 - on.
property_change_rf_power
notify property_change_rf_power <value>
Notify client the RF power setting is changed,
2 = (0 - 20 ft), 3 = (10 - 40 ft), 4 = (30 - 75 ft),
5 = (50 -150 ft), 6 = (100 - 300 ft)
property_change_system_name
notify property_change_system_name <new
name>
Notify client that the system name is changed.
set_mute_status
notify set_mute_status ch<channel number>
<mute>,<mute type>,<mute lock>
Notify client the given microphone's mute status
changed.
<mute> values: 0 - unmuted, 1 - muted
<mute type> values: 0 - Individual Mute,
1 - Tabletop mute, 2 - Push to talk mute
<mute lock> values: 0 - unlocked, 1 - locked
startup_unmute_group
notify startup_unmute_group <group
name> <state>
Notify client that the given mute group's unmute at
startup setting changed,
1 - unmute at startup, 0 - mute at startup.