User Manual

Components

The Revolabs Executive Elite™ System package contains the following:

 Rack mountable 2 channel Base DSP Unit

 Remote Antenna receiver unit with mounting plate

 4 Microphone Charger Base with external Power Supply

 Power cable, USB cable, network cable

 Euroblock connectors

 Documentation

In addition, you might have bought one or more Revolabs Elite wireless

microphones. Each microphone package will include:

 Revolabs Elite wireless microphone (different styles)

 Lanyard and over-the-ear speaker element (wearable microphone only)

 Batteries

 Documentation

The Executive Elite Base DSP unit contains all the logic required to support the

audio signal from the microphones to analog audio output. It supports the

management interfaces (front panel, local web UI, room control system UI), as

well as communication with the remote cloud based UI.

The Remote Antenna receiver contains all components required to receive (and

send) audio signals from (and to) the microphones. It includes the required

diversity antennas. The remote antenna also provides the scan of the RF

frequency to determine current RF traffic. The remote antenna receiver

communicates with the Elite Base DSP unit using a direct IP connection (Cat

5e or Cat 6 cable).

The Charger Base stores and charges the wireless Elite microphones when not

in use. Communication capabilities are not required for the charger tray

because all information transferred between microphones and the Elite base

DSP unit passes over the wireless connection. This includes pairing of

microphones to receivers, firmware updates of microphones, and commands

sent to the microphones.