User Manual

Installation

Base DSP Unit

The Revolabs Executive Elite Base DSP Unit, shown below in front and rear

panel views, provides the audio output of the wireless microphones and the

management interfaces to administer the microphone system.

Front View

1. USB web access to local web user interface

2. Microphone status LEDs, showing pairing and mute status (only the

first 2 LEDs are used)

3. Front panel LCD displaying system information

4. Navigation buttons controlling content of front panel LCD display

5. On/Off switch

Rear View

6. Power In Receptacle (100-240 VAC, 50/60 Hz)

7. Remote Antenna Connector, PoE enabled

8. Not used

9. LAN network connector

10. Serial port for room control interface

11. Not used

12. Not used

13. Euroblock Connectors, analog audio in (black) and audio out (green),

microphone channels 1-2. Analog audio in and analog audio out 3

and 4 are not used.