User Manual

20
Once the back plate is attached to the wall and the network wire is connected
to the Remote Antenna Receiver and routed correctly, the Remote Antenna
enclosure is attached to the back plate by slipping it from the top onto the two
hooks, and then pressing the bottom back against the wall plate until the snap
clicks in.
To separate the Remote Antenna Receiver housing from the wall plate insert a
screwdriver from the bottom into the slit and press against the snap while
carefully pulling the Antenna Receiver forward until the Antenna Receiver
releases from the snap. The Remote Antenna Receiver housing can now be
detached from the wall plate.
Antenna RF Polar pattern
The RF polar pattern of the antenna has a null on the plane of the antenna.
Strongest signal is towards the front of the antenna.
Towards the back of the antenna, the signal is several dB weaker.
Polar pattern of Antenna, side view
Front