User Manual

Front panel user interface

The Front panel user interface is one of four interfaces available to manage an

Executive Elite system. The others are the local web UI, the Cloud Server Web

UI, and the CLI (room control) interface and are described later in this

document.

The front panel contains four areas:

1. On/off switch

2. 4 LEDs (only two are being used)

3. Graphics LCD display

4. 5 button navigation keypad.

The on / off switch powers the Executive Elite base and the connected remote

antenna receiver on and off. During operation, this switch should be in the

“1”, or ‘on’, position.

The LEDs on the front panel show the current microphone states. An LED that

is off indicates that there is either no microphone paired to this channel, or the

paired microphone is in the charger, out of reach, or switched off. A green

blinking LED indicates an active microphone that is unmuted. A red blinking

LED, showing a double blink, indicates an active microphone that is muted. A

rapidly red blinking LED with a single blink indicates the microphone is

upgrading. A constant red LED indicates a channel on which microphone

pairing is taking place at the moment.

The LCD screen together with the navigation keypad allows easy monitoring of

the Executive Elite system as well as managing system settings without

additional equipment. Its home screens provide information on audio levels,

radio signal strength, and access to gain settings for the analog audio output.

The menu structure displays system information, and allows changes to some

system and audio settings. The front panel can also be used to pair and un-

pair microphones. It does not replace the local web UI interface to manage all

options and functionality of an Executive Elite system. The front panel

interface will also not allow access to password protected areas of the interface

unless the system has first been set up using the local web UI.

Home Screens

When starting an Executive Elite system, the first page that comes up on the

Front Panel LCD is the Volume Unit (VU) screen. This screen is one of the 3

home screens on the Front Panel UI. Using the “up” and “down” keys to the

right of the LCD while on the VU page will show the other two home screens.