User Manual

further below. The factory preset password is 7386 (REVO on a telephone key-

pad), and can be changed either through the Admin Settings menu on the front

panel interface, or the System Configuration menu on the local Web UI.

All three home screens are split into 3 sections, and each section shows a

different type of information. On the far right-hand side of the screen, the

Home screen name is displayed at the top of the external systems information

box. Underneath it the antenna icons shows if the antenna is connected:

- Antenna. If it is blinking, an antenna is not communicating with the

Base DSP unit. If it is solid, communication is passing between the Antenna

and Base.

Separated from the external systems box by a vertical line is the channel

information section of the Front Panel UI. At the top, each channel is labeled,

and two rows underneath provide different information depending on which

home screen is currently selected.

On all screens, the top row will show microphone status beyond linked with the

following icons:

- Microphone Lost Link, or Unknown Status Microphone

- Firmware Update in Process

- Stand-by Mode

Microphone channels that have no microphone paired, a charging microphone,

or when the microphone is switched off, will show no information.

Additional information from this row can be found in the following symbols:

- Mute Symbol. Will show on the VU screen for a linked, muted

microphone.

- VU or Gain Meters. VU screen shows a VU meter for a linked, unmuted

microphone, while the Gain screen meters look the same, but do not change

unless set, and appear for all linked microphones.