User Manual

29
System Information
The first option in the Main Menu is System Information. System Information
offers information on the Base DSP unit, the Remote Antenna Receiver, the
Microphones, and the available network connections. None of the information
in this menu and the submenus can be changed.
Base Information provides information on the current firmware running on the
base DSP unit, the product version, product name, and system name.
The Antenna Version menu indicates whether the link to the antenna is up or
down, shows the Mac address of the remote antenna, and lists the Firmware
version of the software running on the Remote antenna.
In the Microphone Information submenu paired microphones are listed.
Selecting any of these microphones will present the information on that specific
microphone, including microphone type, firmware version, and the ID of the
microphone.
In the Network Information section the two different networks available to the
user are each given a submenu. Network Information (LAN) provides
System Info
1. Base
Information
2. Antenna
Information
3. Microphone
Information
4. Network
Information
Base Information
1. FW Version
2. Product Version
3. System Name
4. Product Name
Antenna Information
1. Link Status
2. MAC Address
3. FW Version
Microphone Information
1. Mic 1 Information
2. Mic 2 Information
Mic 1 Information
1. Mic 1 Type
2. Mic 1 Version
3. Mic 1 ID
Network Information
1. Network Information
(LAN)
2. Network Information
(USB)
Network Information (LAN)
1. IP Address
2. MAC Address
3. Subnet
4. DHCP enabled /
disabled
5. Gateway
6. DNS Server 1
7. DNS Server 2
Network Information
(USB)
1. IP Address
2. MAC Address