User Manual

31
except in high RF environments as it allows the system to automatically reduce
RF power when it is not required.
In the Admin Settings menu the standard password used on the local web UI
and the front panel can be changed. The user can also log-out of the front
panel from here.
Audio Settings
The Audio Settings section allows changing audio properties of the Executive
Elite system.
The System Audio submenu controls the partitioning of the available RF space,
controlling the number of bytes allocated to transport the audio data between
microphone and the base DSP unit.
Standard Definition (SD) reserves less RF space per microphone channel,
reducing the audio quality slightly as a higher compression has to be used.
High Definition (HD) allocates more RF space per microphone channel,
increasing the audio quality.
The back channel audio checkbox enables or disables return audio from the
base to the Executive Elite microphones. If back channel audio is not used,
this option may be switched off. If the Executive Elite system is used in Legacy
HD mode, the checkbox cannot be unselected, as legacy systems require the
audio back channel.
NOTE: The RF analyzer page in the local web UI shows the use of the RF
space.
Audio Settings
1. System Audio
2.
High Pass Filter
3. Low Pass Filter
System Audio
1. Standard Definition (SD)
2. High Definition (HD)
3. Legacy Mode on/off
4. Back Channel on/off
High Pass Filter
1. Microphone 1
2. Microphone 2
Mic 1 High Pass Filter
1. None
2. 110 Hz
3. 140 Hz
4. 175 Hz
5. 220 Hz
Low Pass Filter
1. Microphone 1
2. Microphone 2
Mic 1 Low Pass Filter
1. None
2. 4000 Hz
3. 8000 Hz
4. 12000 Hz