User Manual

44
System Information
The System Information page provides information on the Executive Elite’s
components.
“General Info” displays the System Name, the serial number, and the base
firmware version.
The “Remote Antenna Receiver” section shows the antenna’s MAC Address, the
DECT ID for the baseband (antenna), and the antenna firmware version. This
section also includes information on whether the antenna is currently
connected or not.
Across the middle of the page, the two microphones are listed by channel, with
their microphone type, DECT ID, and the current firmware version provided. A
channel with no microphone paired will show no information.
The “Base Digital Signal Processing Unit” table displays the Base’s IP Address,
MAC Address, and the static IP Address used by the USB port on the front of
the base. Any changes made to this information through the Network
Management page will be displayed here.
System Configuration
The System Configuration page allows setting several of the system
configuration values, including system name and region. Changes to any entry