User Manual

45
on this web page only take effect when clicking the Save button. Leaving the
page without previously saving changed information will discard the changes.
System Name allows changing the descriptive name under which a system is
being identified. It is recommended to select a name that helps identifying a
system in the cloud web UI.
To reset the system password used on the front panel user interface and the
local web interface enter the new password in the password field, and confirm
it in the confirm password field before saving. The password needs to be
numeric, and has a minimum length of 4 digits.
The Enable Telnet Server setting will enable or disable telnet access to the
Base. Please note that if this setting is set to ‘Off’ the Telnet option for servers
on the External Control Page will not function.
Selecting “Base Pairing Lock” will disable the pairing functionality from the
system’s front panel. Even if Base Pairing is not locked, the front panel
requires the password before allowing pairing of microphones.
A clock tuning option might be available on some systems. It should remain
set to Default unless advised by [e-mail] to change
that setting.