User Manual

62
Firmware updates
Executive Elite Firmware can be upgraded two different ways. An Executive
Elite system registered to the revoCloud can be upgraded to the most recent
build from the Cloud Support web page. Select the system on the cloud
webpage, and click on “Upgrade to latest build” to immediately upgrade the
system as described on page 60.
Any system, independent on whether it is registered on the cloud server or not,
can be updated through the Software Upgrade page of the local Web UI. If the
system is registered to the cloud server, the webpage allows checking the Cloud
Server for an upgrade. An unregistered Executive Elite system can be
upgraded from the Web UI using an upgrade software bundle accessible from
the computer connected to the Executive Elite system as described on page 55.
Upgrade bundles are available on Yamaha Unified Communications, Inc.
website in the support section. [e-mail]
Firmware upgrades upgrade all linked components on an Executive Elite
system.
 The Software Download pages show the progress of the Base then Antenna
upgrades, in that order.
 After the upgrade is successful, linked microphones will begin upgrading
over RF. If microphones are not linked, they will begin upgrading the next
time they are linked.
 Microphones in a charger will still upgrade as long as they are paired to the
Elite unit that is upgraded.
 An upgrade of the Base unit and the antenna takes about ten minutes.
 Depending on the System Audio Setting, Microphones can take up to 6
minutes to upgrade. Audio modes in which back-channel audio is disabled
will take longer to update the microphones.