User Manual

The Elite Omni-Directional Wireless Tabletop Boundary

Microphones

The Elite Omni-directional Wireless Tabletop Boundary Microphones enable

multiple conference attendees to use a single microphone.

1. Mute touch areas & LEDs — touch to mute, un-mute, or pair the

microphone. LEDs provide visual status for mute, un-mute, and pairing.

The omni-directional microphone provides four mute touch areas and status

LEDs, one on each side of the microphone. Any one of these touch areas

may be used to mute and unmute the microphone.

2. Charging connector — connects to the charging pins of the Elite charging

tray or crossover adapted.

3. Battery door latch — open the battery door using this latch.

4. Rechargeable batteries — replace batteries only with NiMH 2000mA

rechargeable batteries. Non-rechargeable batteries or rechargeable batteries

of a different type or lower charge might impact performance of the

microphone, and might cause harm to the microphone, users, or the

environment. Using non-approved battery types will void the warranty on

the microphones. When replacing the batteries, ensure that the batteries

are placed in the correct way as indicated by the print in the battery cavity

of the microphone.

5. Battery charge status LED — under the screen, warns for low battery. The

LED will turn yellow when there are 4 hours of talk time remaining and red

for the last two hours of charge.