User Manual

The Elite Directional Wireless Tabletop Boundary

Microphones

The Elite Directional Wireless Tabletop Boundary Microphone, shown below, is

designed to provide optimum coverage when placed on a conference room table

in front of one to three people.

1. Mute touch area — touch to mute, un-mute, or pair the microphone. The

directional microphone provides one mute touch area on the edge closest to

the speaker.

2. Charging connector — connects to the charging pins of the Elite charging

tray or crossover adapter.

3. Battery door latch — open the battery door using this latch.

4. Rechargeable batteries — replace batteries only with NiMH 2000mA

rechargeable batteries. Non-rechargeable batteries or rechargeable batteries

of a different type or lower charge might impact performance of the

microphone, and might cause harm to the microphone, users, or the

environment. Using non-approved battery types will void the warranty on

the microphones. When replacing the batteries, ensure that the batteries

are placed in the correct way as indicated by the print in the battery cavity

of the microphone.

5. Battery charge status LED — under the screen, warns for low battery. The

LED will turn yellow when there are 4 hours of talk time remaining and red

for the last two hours of charge.

6. Status LEDs — provide visual status for mute, un-mute, and pairing.