User Manual

73
1
4
3
2
5
6
7
8
Elite Wireless XLR Adapter
The Elite Wireless XLR Adapter allows dynamic hand-held microphones to be used
with an Executive Elite system.
1. Earpiece jack — accepts a 2.5mm earpiece plug.
2. Battery door — push towards the back of the microphone to open
the battery compartment.
3. Li-Ion rechargeable battery — can be taken out and replaced after
opening the battery door. Replace batteries only with Revolabs
approved rechargeable batteries.
4. Battery charge status LED — warns for low battery. When there is
approximately 2 hours of talk time remaining, this LED will turn
yellow. When the LED turns red, there is approximately 1 hour of
charge remaining.
5. Mute LED — visual status for mute, un-mute, and pairing.
6. Mute button — press to mute, un-mute, and pair microphone.
7. Charging connector — connects to the charging pins of the Elite
charging tray.
8. XLR connector — male XLR connector, connecting to dynamic XLR
handheld microphones.