User Manual

Executive HD Overview: Refer to Executive HD
Installation and Operation Guide on https://uc.yamaha.com
DIP Switch
Feature Off (Default) On
1
Multiple System
Operation Mode
Primary Secondary
4 Audio Output Level Line ~0 dBu Mic ~ 40 dBu
Regulatory Information (full information in Installation and Operation Guide)
FCC Registration Number: 0014898290
RF ETSI EN 301 406 V 1.4.1 03/2001
EMC ETSI EN 301 489-6 v1.2.1 (2002-04)
1 2 3 4 5 6 7 8
on
off
1 2
3
4
5
6 7 8
11
1. Channel LED indicators: Displays microphone mute and pairing states
2. Diversity Antenna: One or two sets (4 channel or 8 channel)
3. Pairing Push Buttons: For pairing microphones to Base Station
4. Two Line LCD Display for front panel operation, command and control
5. Navigation Buttons for menus on front panel LCD interface
6. Reset On/Off Switch: Powers up unit
7. Power In Receptacle (100-240 VAC)
8. Ethernet Port
9. System Reset Button
10. Mini-Phoenix Connector: Multiple Base Station (BUS) synchronization connection
11. RS-232 Serial Interface, DB9
12. Base station status LEDs
13. Configuration DIP Switches
14. Mini-Phoenix Connectors: Balanced Audio in and out connections (4 or 8 channels)
13
14
10
9 12
Configuring DIP Switches
Box Contents
NOTE: Revolabs Wireless Microphones Ship in Separate Boxes
How to Assemble
1. Rack-mount Executive HD Base Station
2. Attach the diversity antennas (2 or 4 SMA female connectors)
3. Wire mini-Phoenix connectors with appropriate 3 conductor cable
4.
Plug the power cord into Base Station and appropriate electrical
outlet
5. Turn on the unit using the power switch on the back panel
6. Plug power adapter into Charger Base and appropriate electrical outlet
7.
Pair Revolabs Wireless Microphones to Base Station usin
g the pairing
instructions
8. Place microphones into Charger Base
9. Download the HD Control Panel software and firmware updates from
https://uc.yamaha.com/resources/support/
PHANTOM POWER MUST BE OFF. PHANTOM POWER MAY CAUSE
DAMAGE TO THE BASE STATION
Charger Base (4 or 8 Channel)
Universal power supply and plug for Charger Base
Executive HD Base Station (4 or 8 Channel)
and 2 or 4 Diversity Antenna (shown attached)
USB Cable to Charger Base for
Microphone Firmware Upgrades
Power Cord for Base Station
8 or 16 Phoenix Connectors
Technical Support: https://uc.yamaha.com/resources/support/
Copyright 2018 Yamaha Unified Communications, Inc.
Yamaha Unified Communications, Inc.
144 North Road #3250
Sudbury, MA 01776 USA
[phone]
[e-mail]
Yamaha UC EMEA
190 High Street Tonbridge, Kent
TN9 1BE, UK
[phone]
[e-mail]
Yamaha UC APAC
+852.8108.8820
[e-mail]