User Manual

24
2-8. Generating Reports
Press the REPORT button on the View Results screen to open the Report Output screen (as
shown below).
Generate report
When you press the REPORT button on the right side of the screen, a dialog box will appear
asking you to enter the storage location and file name of the PDF file. Enter the information, and
save the file.
The following items may be specified for PDF output.
Item
Output
[PDF] ALL
Outputs all information to a PDF file.
[PDF] SPEAKERSET
Outputs project information and speaker information to a PDF file.
[PDF] SPEAKERLAYOUT
Outputs project information and the speaker layout to a PDF file.
[PDF] SPL MAP ALL
Outputs project information and the sound pressure map for the entire
frequency to a PDF file.
[PDF] SPL MAP
[Overall A-Weighted]
Outputs project information and the sound pressure map of the
measurement frequency [Overall A-Weighted] to a PDF file.
[PDF] SPL MAP
[Overall Flat]
Outputs project information and the sound pressure map of the
measurement frequency [Overall Flat] to a PDF file.
[PDF] SPL MAP
[HIGH, 2 kHz-8 kHz]
Outputs project information and the sound pressure map of the
measurement frequency [HIGH, 2 kHz-8 kHz] to a PDF file.
[PDF] SPL MAP
[MID, 500 Hz-2 kHz]
Outputs project information and the sound pressure map of the
measurement frequency [MID, 500 Hz-2 kHz] to a PDF file.
[PDF] SPL MAP
[LOW, 125 Hz-500 Hz]
Outputs project information and the sound pressure map of the
measurement frequency [LOW, 125 Hz-500 Hz] to a PDF file.