Operation Manual
3
F02 MIDI Reference
Program Change
P.C.# =Program Change Number
Voice Name MSB LSB
P. C . #
(0 – 127)
G.PIANO 1 108 0 0
VARIATION 108 2 0
G.PIANO 2 108 2 1
VARIATION 108 0 1
E.PIANO 1 108 0 5
VARIATION 108 0 88
E.PIANO 2 108 0 4
VARIATION 108 1 4
HARPSICHORD 108 0 6
VARIATION 108 1 6
ORGAN 1 108 1 19
VARIATION 108 0 19
ORGAN 2 108 0 16
VARIATION 108 1 16
STRINGS 108 0 48
VARIATION 108 0 49
VIB./GTR. 108 0 11
VARIATION 108 0 24
BASS 108 0 32
VARIATION 108 0 33
Parameters controlled by RPN (Registered Parameter Numbers)
RPN Data Entry
Parameter Data Range
MSB LSB MSB LSB
00H 01H mmH llH Fine Tune mm ll: 00H 00H -100[cent]
...
mm ll: 40H 00H 0[cent]
...
mm ll: 7FH 7FH 100[cent]
00H 02H mmH – Coarse Tune mm: 28H-40H-58H
(-24...0...+24[semitones])
7FH 7FH – – Null –
Program Change CnH pp 0 – 127 – – ○ ○
Channel After Touch DnH vv – × ×
Polyphonic After Touch AnH kk vv △ ×
Pitch Bend Change EnH cc LSB dd MSB △ ○
Realtime Message F8H MIDI Clock – – ○ ×
FAH Start – – ○ ○
FBH Continue – – × ×
FCH Stop – – ○ ○
FEH Active Sens – – ○ ○
FFH System Reset – – × ×
Note
When an Overrun or Framing error occurs, the Damper, Sostenuto and Soft are set to off in all channels, and All Notes Off is executed.
MIDI Events
Status byte 1st Data byte 2nd Data byte
Transmitted Recognized
Status Data (HEX) Parameter Data (HEX) Parameter