Service manual

63P3F11
7-14
1
2
3
4
5
6
7
8
9
11. Install the upper mounts
E
and bolts into
the upper case.
12. Install the bracket
F
and bolts, and then
tighten the bolts to the specified torque.
Removing the steering arm
1. Remove the circlip
1
.
2. Remove the steering yoke
2
by striking
it with a plastic hammer.
3. Remove the steering arm from the swivel
bracket by pulling the arm off the bracket.
Installing the steering arm
1. Install the washer
1
and bushing
2
onto
the steering arm
3
.
2. Place the swivel bracket
4
in an upright
position, and then install the steering arm
onto the swivel bracket.
3. Install the bushing
5
, new O-ring
6
,
bushing
7
, and washer
8
onto the
swivel bracket.
T
R
.
.
Muffler assembly bolt
C
:
20 N·m (2.0 kgf·m, 14.8 ft·lb)
Muffler assembly bolt
D
:
42 N·m (4.2 kgf·m, 31.0 ft·lb)
T
R
.
.
Upper mount bracket bolt:
54 N·m (5.4 kgf·m, 39.8 ft·lb)
Upper case, steering arm, swivel bracket and clamp brackets