Instruction manual

Introduction
2
Functions by data transmission type1-1.
Composition and function-specific characteristics of YAMAHA Diagnostic System Version 2.00 are as per the list below.
Menu Primary Function What You Can Do Comparison
to Version
1.33
Top Menu Main Menu 2nd-level
Menu
3rd-level
Menu
Start Engine Diagnosis Diagnosis Displays results of current fault diagnosis. Identify abnormalities.
Diagnosis
Record
Displays a history of fault diagnosis recorded
in the ECM.
Engine
Record(*1)
Displays the engine state recorded in the
ECM.
Check the engine trouble history.
Engine
operating
hours by RPM
Displays operating hours by RPM. Check the history of engine usage.
Engine
Monitor
Digital Display Displays ECM data numerically. Check the current operating state of the
engine.
Graph Display Displays ECM data in graph form.
Input Setting Settings to display data from connected
external devices on YDIS screen.
View data from external devices on YDIS. New
Component
Test
Stationery
Test
Performs an operational test of each
component with the engine stopped.
Check functioning of each component.
Active Test Performs an operational test of each
component with the engine running.
(*1) The following functions are not available in watercrafts: CAN Information, Boat System, Maintenance, Engine Record, and unit selection in the Setting.