Instruction manual

Connecting the computer to the watercraft
22
Connecting the computer to the watercraft
Connect the computer to the watercraft.
TIP:
Before starting the YAMAHA Diagnostic System every first time after turning on the computer, quit any other applications that are running.•
When connecting, ensure you use the included cables or harness.•
See the corresponding service manual for information on how to connect.•
When you finish all the YAMAHA Diagnostic System operations, make sure to remove the USB cable and reattach the coupler cap of the •
watercraft.
If using the adapter, make sure that you have installed the device driver.•
Check that all electrical connections are secure and free from corrosion, and that the battery is fully charged.•
When not connecting an AD harness (for external input) to the adapter, then replace the adapter cap to prevent water from entering.•