Instruction manual

Engine
67
Injector activation test
■
Do not perform the test with the injector removed or with any fuel system •
parts removed. High-pressure fuel may spray out.
When performing this operation, keep all sparks, flames, or other sources •
of ignition away from the testing area. Gasoline is highly flammable.
Perform a fuel system test. Activate the injector (20 times in 2 seconds) for a selected
cylinder.
1.
Display the test item selection screen.
Select “Activate injector” by either clicking it or pressing the up or down arrow
2.
keys on your keyboard.
Click the [OK] button or press the [Enter] key on your keyboard.
3.
The test screen is displayed.
4.
Click the [Execute] button or press the [Enter] key on your keyboard.
5.
Listen to the operating sound of the injector.
6.
Do not test the same cylinder more than 3 times consecutively, as it may
damage the spark plug insulators.
TIP:
Click the [Cancel] button or press the [Esc] key on your keyboard to stop the test.•
To carry out the test again, click the [Execute] button or press the [Enter] key on •
your keyboard.
When testing a different cylinder or item, click the [Back] button or press the [Esc] •
key on your keyboard to return to the previous screen.