Instruction manual

Engine
70
Bypass valve motor activation test
■
Apply voltage to the bypass valve motor and activate it for 7 seconds to test the
bypass valve motor operation.
Display the test item selection screen.
1.
Select “Activate bypass valve motor” by either clicking it or pressing the up or
2.
down arrow keys on your keyboard.
Click the [OK] button or press the [Enter] key on your keyboard.
3.
The test screen is displayed.
4.
Click the [Execute] button or press the [Enter] key on your keyboard.
5.
Check that the bypass valve motor operates properly on the graph.
6.
TIP:
Click the [Cancel] button or press the [Esc] key on your keyboard to stop the test.•
To carry out the test again, click the [Execute] button or press the [Enter] key on •
your keyboard.
To perform a different test, click the [Back] button or press the [Esc] key on your •
keyboard to return to the previous screen.