Instruction manual

Engine
71
YPVS activation test
■
Apply voltage to the YPVS servomotor and activate it for 2 seconds to test the YPVS
operation.
Display the test item selection screen.
1.
Select “YPVS” by either clicking it or pressing the up or down arrow keys on your
2.
keyboard.
Click the [OK] button or press the [Enter] key on your keyboard.
3.
The test screen is displayed.
4.
Click the [Execute] button or press the [Enter] key on your keyboard.
5.
Check that the YPVS operates properly on the graph.
6.
TIP:
Click the [Cancel] button or press the [Esc] key on your keyboard to stop the test.•
To carry out the test again, click the [Execute] button or press the [Enter] key on •
your keyboard.
To perform a different test, click the [Back] button or press the [Esc] key on your •
keyboard to return to the previous window.