Instruction manual

Engine
72
Active Test3-2.
Make sure to moor the watercraft before performing the test.
Perform the test with the engine running and the throttle lever fully closed.
It is not possible to carry out the test while the watercraft is moving.
Active Test items
Item
Drop cylinder
Refer to “Functions by model” for detailed information.
Display the Engine menu.
1.
Click the [3) ComponentTest] button in the 2nd-level menu or press the [3], [Enter]
2.
or right arrow key on your keyboard.
The 3rd-level menu is displayed.
3.
Click the [Active Test] in the 3rd-level menu or [OK] button, or press the [Enter]
4.
key on your keyboard.
The test item selection screen is displayed.
5.
Avoid clicking the [Execute] and [Cancel] buttons repeatedly, otherwise the
ECM or computer may not work properly and they may be damaged.
TIP:
If an error has been detected during the test, an error message appears. Follow
the instructions on screen.