Instruction manual

Introduction
3
Menu Primary Function What You Can Do Transmission Method Comparison
to Version
1.33
CAN-Line K-Line
Top Menu Main
Menu
2nd-level
Menu
3rd-level
Menu
6Y9
Color
Gauge
hub
6Y8
Meter
hub
Start Engine Data
Logger
Record Set Displays a graph of past data recorded
in the ECM.
Check the past operating
state of the engine.
YES — YES New
Show Data Displays a graph of data recorded
before and after troubles.
YES — YES
Logging Displays a graph of data recorded on
the adapter.
YES — YES
Boat
System
Tilt Limiter Sets the tilt angle when the outboard
motor is tilted up.
Configure systems. YES — YES
R/C System Reset Returns connection between the
outboard motor and the Digital
Electronic Control to default settings.
YES — YES
Maintenance Engine oil change record Records oil change history. Manage oil change history. YES — YES
Update Update database. Update database. YES — YES
Setting Sets the language and units displayed
on YDIS screen.
Switch screen displays. YES — YES(*2) New
Off Line Displays data saved on the computer,
when the ECM is disconnected.
Check data saved
on computer without
connecting to ECM
YES — YES
CAN
Information
Communication List Displays quality of CAN system device
connection and transmission.
Distinguish the type of
device connected.
YES YES — New
Bus Statistics Displays the transmission load ratio for
the CAN system.
Check whether devices
are connected correctly.
YES YES —
(*2) When connected via K-Line, you cannot select display units.