Instruction manual

Engine
90
The graph screen is displayed.
7.
TIP:
You can change the display values and display colors. See “• Setting the graph
properties.”
Click the [x 2] or [x 4] buttons or press the [2] or [4] key on your keyboard to •
double the X axis (time).
Click the [/2] or [/4] buttons or press the [Shift]+[2] or [4] keys to cut the scale of •
the X axis by half.
Click the [<] or [>] buttons or press the right or left arrow keys to move the •
guidelines (the red lines) position one gradient in the relevant direction. The
figures for the position that matches the guidelines (the red lines) appear at the
top right of the table.
Click the [<<] or [>>] button, or press [Shift] + the left or right arrow keys to move •
the position of the end guidelines (the red lines) in the relevant direction.
Click the [All] button or press the space bar to display all saved data on screen.•
Click the [Reset] button to reset the saved data to the default values.•