Service manual

69J1D11
5-40
1
2
3
4
5
6
7
8
9
2. Check the cylinder head warpage using a
straightedge
1
and thickness gauge
2
in six directions as shown. Replace if out
of specification.
Installing the valves
1. Install the new valve seal
1
to the valve
guide.
2. Install the valve
2
, valve spring
3
, and
valve spring retainer
4
in the sequence
shown, and then attach the special ser-
vice tool.
NOTE:
The valve spring can be installed in any
direction.
3. Compress the valve spring, and then
install the valve cotter
7
using a thin
screwdriver with a small amount of
grease applied to it.
Cylinder head warpage limit:
0.1 mm (0.004 in)
Valve spring compressor
5
:
YM-01253
Valve spring compressor attachment
6
:
YB-06320
Cylinder head