Service manual

LOWR
Lower unit
6-11
69J1D11
Removing the propeller shaft
housing assembly
1. Remove the bolts
1
, ring
2
, and bolts
3
.
2. Pull out the propeller shaft housing
assembly.
Disassembling the propeller shaft
assembly
1. Remove the spring
1
, and then remove
the cross pin
2
, dog clutch
3
, slider
4
,
shift plunger
5
, and shift rod joint
6
.
Disassembling the propeller shaft
housing
1. Remove the reverse gear and reverse
gear shim(s).
2. Remove the ball bearing.
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Slide hammer and adapters
4
:
YB-06096
Propeller shaft and bearing housing
remover
5
:
YB-06335
S69J6060
È
Slide hammer and adapters
1
:
YB-06096
Slide hammer and adapters
2
:
YB-06096
Puller claw
3
: YB-06523
È
S69J6080
È