Service manual

69J1D11
6-44
1
2
3
4
5
6
7
8
9
Checking the pinion and reverse
gear
1. Check the teeth of the pinion, and the
teeth and dogs of the reverse gear for
cracks or wear. Replace if necessary.
Checking the bearings
1. Check the bearings for pitting or rum-
bling. Replace if necessary.
Checking the drive shaft
1. Check the drive shaft for bends or wear.
Replace if necessary.
Checking the lower case
1. Check the skeg and torpedo for cracks or
damage. Replace if necessary.
Assembling the lower case
1. Install the needle bearing into the
retainer to the specified depth.
2. Install the original shim(s) and retainer
into the lower case.
Roller bearing installer/remover
5
:
YB-06432
Driver handle
6
: YB-06071
S69J6200
Needle bearing installer
1
:
YB-06434
Driver handle
2
: YB-06071
Depth
a
:
–0.25–0.25 mm (–0.010–0.010 in)
S69J6210
S69J6215
Drive shaft and lower case (counter rotation model)