Service manual

LOWR
Lower unit
6-47
69J1D11
NOTE:
Apply grease to the new O-rings before
installation.
2. Install the bolts
1
, ring
2
, and bolts
3
,
and then tighten the bolts
1
to the speci-
fied torque.
Installing the water pump and shift
rod
1. Install the shift rod assembly
1
.
2. Install the new gasket
2
, outer plate car-
tridge
3
, and dowel pins
4
.
3. Install the Woodruff key into the drive
shaft.
4. Align the groove on the impeller
5
with
the Woodruff key
6
, and then install it to
the drive shaft.
T
R
.
.
Propeller shaft housing bolt
1
:
30 N·m (3.0 kgf·m, 22 ft·lb)