Service manual

69J1D11
6-54
1
2
3
4
5
6
7
8
9
Selecting the propeller shaft shims
1. Install the shim(s)
1
, thrust bearing
2
,
propeller shaft
3
, taper roller bearing
4
,
and claw washer
5
, and then tighten the
ring nut
6
to the specified torque.
2. Measure the propeller shaft free play as
shown.
3. Select the propeller shaft shim(s) (T’4).
NOTE:
Add or remove shim(s), if the free play is out
of specification.
Backlash
(counter rotation model)
6
Measuring the forward and reverse
gear backlash
1. Remove the water pump assembly.
2. Set the gearshift to the neutral position.
Calculation formula:
Forward gear shim thickness (T2) =
M0 – M
Available shim thicknesses:
0.10, 0.12, 0.15, 0.18, 0.30, 0.40, and
0.50 mm
Ring nut wrench: YB-06578
T
R
.
.
Ring nut
6
:
108 N·m (10.8 kgf·m, 78 ft·lb)
Propeller shaft free play:
0.25–0.35 mm (0.010–0.014 in)
Magnet flexible stand
7
: YU-34481
Dial gauge
8
: YU-03097
Available shim thicknesses:
0.10, 0.12, 0.15, 0.18, 0.30, 0.40, and
0.50 mm
Shift rod push arm: YB-06052
S69J6705
T´4
È
Shimming (counter rotation model) / Backlash (counter rotation model)