Service manual

BRKT
Bracket unit
7-33
69J1D11
WARNING
Never look into the tilt cylinder opening
because the free piston and power trim
and tilt fluid may be expelled out force-
fully.
5. Hold the tilt piston in a vise using the
special service tool
4
on both sides.
6. Remove the tilt ram.
7. Hold the cylinder block
6
in a vise using
aluminum plates
a
on both sides.
8. Loosen the trim cylinder end screws
7
,
and then remove them.
9. Remove the trim piston assemblies.
10. Drain the power trim and tilt fluid.
11. Remove the circlip
8
, adapter
9
, and
spring
0
from the trim piston assem-
blies.
12. Hold the trim ram
A
in a vise using alu-
minum plates
a
on both sides.
13. Remove the trim piston
B
.
PTT piston vice attachment
4
:
YB-06572
Tilt rod wrench
5
: YB-06569
Trim and tilt cylinder wrench:
YB-06175-2B