Owner`s manual

8-15
Replacing the differential gear oil
1. Place the ATV on a level surface.
2. Place a container under the differential
gear case to collect the used oil.
3. Remove the differential gear oil filler bolt
and differential gear oil drain bolt to drain
the oil.
1. Differential gear oil drain bolt
4. Install the differential gear oil drain bolt
and tighten it to the specified torque.
5. Fill the differential gear case with the rec-
ommended oil.
CAUTION:
_
Be sure no foreign material enters the dif-
ferential gear case.
_
Tightening torque:
Differential gear oil drain bolt:
10 Nm (1.0 m·kgf, 7 ft·lbf)
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
Oil quantity:
0.35 L (0.31 Imp qt, 0.37 US qt)
EE.book Page 15 Thursday, March 31, 2005 2:01 PM