Owner`s manual

Operation
52
2. Align the fuel cock with the built-in fuel
tank position.
3. Remove the top cowling, and then
squeeze the primer pump in the bottom
cowling repeatedly until you feel it be-
come slightly firm.
4. Install the top cowling.
Sending fuel for portable fuel tank (optional)
(F4, F6)
1. To loosen the air vent screw, turn it coun-
terclockwise until it stops.
2. If there is fuel in the built-in fuel tank,
open the air vent valve to prevent pres-
sure from increasing inside the tank due
to fuel expansion.
3. Check the direction of the fuel hose.
Make sure that the arrow of the primer
pump points toward the outboard motor.
1. Air vent valve
1. Built-in fuel tank position
1. Primer pump
ZMU07625
11
ZMU06720
1
1
ZMU06826
1
1. Air vent screw
1. Air vent valve
1
ZMU07445
ZMU07625
11
U6BV37E0.book Page 52 Wednesday, May 1, 2013 8:56 AM