Owner`s manual

Operation
46
tilt support lever / tilt support knob be-
comes free.
2. Release the tilt support lever or pull out
the tilt support knob.
3. Push the power trim and tilt switch / pow-
er tilt switch “” (down) to lower the out-
board motor to the desired position.
EMU28060
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
EMU28090
Power trim and tilt models / power tilt
models
The outboard motor can be tilted up partially
to allow operation in shallow water.
WARNING
EWM00660
●
Place the gear shift in neutral before
setting up for shallow water cruising.
● Return the outboard motor to its normal
position as soon as the boat is back in
deeper water.
CAUTION:
ECM00260
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ZMU03644
DN
ZMU01936
UP
DN
DN
ZMU03645
DN
ZMU04196