Owner`s manual

Maintenance
50
Control system:
F50FEHT Tiller
F50FET Remote control
F60CEHT Tiller
F60CET Remote control
FT50GET Remote control
FT60DET Remote control
Starting system:
Electric
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.15–0.25 mm (0.0059–0.0098 in)
Valve clearance (cold engine) EX:
0.25–0.35 mm (0.0098–0.0138 in)
Min. cold cranking amps (CCA/EN):
430.0 A
Min. rated capacity (20HR/IEC):
70.0 Ah
Alternator output for battery DC:
17.0 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
F50FEHT 1.85 (24/13)
F50FET 1.85 (24/13)
F60CEHT 1.85 (24/13)
F60CET 1.85 (24/13)
FT50GET 2.33 (28/12)
FT60DET 2.33 (28/12)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F50FEHT G
F50FET G
F60CEHT G
F60CET G
FT50GET K
FT60DET K
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. research octane:
90
Fuel tank capacity:
24 L (6.34 US gal) (5.28 Imp.gal)
Recommended engine oil:
4-stroke outboard motor oil
Engine oil grade API:
API SE, SF, SG, SH, SJ, SL
Engine oil type SAE:
SAE10W30 or SAE10W40
Lubrication:
Wet sump
Engine oil quantity (excluding oil filter):
2.5 L (2.64 US qt) (2.20 Imp.qt)
Recommended gear oil:
Hypoid gear oil SAE#90
Gear oil quantity:
F50FEHT 430.0 cm
3
(14.54 US oz)
(15.17 Imp.oz)
F50FET 430.0 cm
3
(14.54 US oz)
(15.17 Imp.oz)
F60CEHT 430.0 cm
3
(14.54 US oz)
(15.17 Imp.oz)
F60CET 430.0 cm
3
(14.54 US oz)
(15.17 Imp.oz)
FT50GET 670.0 cm
3
(22.65 US oz)
(23.63 Imp.oz)
FT60DET 670.0 cm
3
(22.65 US oz)
(23.63 Imp.oz)
Tightening torque for engine:
Spark plug:
18.0 Nm (13.3 ft-lb) (1.84 kgf-m)
Propeller nut:
35.0 Nm (25.8 ft-lb) (3.57 kgf-m)
Engine oil drain bolt:
18.0 Nm (13.3 ft-lb) (1.84 kgf-m)
Engine oil filter:
18.0 Nm (13.3 ft-lb) (1.84 kgf-m)