Owner`s manual

Trouble Recovery
76
1. Stop the engine.
2. Remove the top cowling.
3. Remove the plastic tie.
4. Disconnect the water detection switch
coupler.
CAUTION:
ECM01570
Be careful not to get any water on the wa-
ter detection switch coupler, otherwise a
malfunction could occur.
5. Unscrew the filter cup from the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when unscrewing the filter cup.
6. Drain the water in the filter cup by soak-
ing it up with a rag.
NOTE:
Properly dispose of the rag.
7. Firmly screw the filter cup onto the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when screwing the filter cup onto
1. Water separator warning indicator
1. Plastic tie
1
ZMU05475
1. Water detection switch coupler
1. Filter cup
2. Water detection switch lead
1
ZMU05476
1
2
ZMU05477