Owner`s manual

Operation
39
3. Slightly tilt the outboard motor up and
pull the shallow water lever toward the
transom.
4. To return the outboard motor to the nor-
mal position, place the gear shift lever in
neutral, then slightly tilt the outboard
motor up. Push the shallow water lever
down. Set the tilt lock lever to the lock
position and slowly tilt the outboard mo-
tor down.
EMU28192
Cruising in other conditions
Cruising in salt water
After operating in salt water, flush the cooling
water passages with fresh water to prevent
them from becoming clogged with salt de-
posits.
NOTE:
For cooling system flushing instructions, see
page 42.
Cruising in turbid water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
(not available for some models) if you use
the outboard motor in turbid or muddy water
conditions.
ZMU04403
ZMU04409
ZMU04410