Owner`s manual

Maintenance
52
mark, drain until the level meets the
specified capacity. Overfilling the oil
could cause leakage or damage.
5. Start the engine and watch to make sure
the oil pressure indicator turns on. Make
sure that there are no oil leaks.
CAUTION:
ECM01420
If the oil pressure indicator does not turn
on, or if there are oil leaks, stop the en-
gine and find the cause. Continued oper-
ation with a problem could cause severe
engine damage. Consult your Yamaha
dealer if the problem cannot be located
and corrected.
6. Turn off the engine and wait 3 minutes.
Recheck the oil level using the dipstick
to be sure the level falls between the up-
per and lower marks. Fill with oil if it is
below the lower mark, or drain to the
specified level if it is above the upper
mark.
7. Dispose of used oil according to local
regulations.
NOTE:
● For more information on the disposal of
used oil, consult your Yamaha dealer.
●
Change the oil more often when operating
the engine under adverse conditions such
as extended trolling.
EMU29112
Checking wiring and connectors
●
Check that each grounding wire is properly
secured.
●
Check that each connector is engaged se-
curely.
EMU29120
Exhaust leakage
Start the engine and check that no exhaust
leaks from the joints between the exhaust
cover, cylinder head, and body cylinder.
1. Oil filler cap
1
ZMU04418
ZMU02058
ZMU04419