User Manual

52
DTX-PROX Owner’s Manual
Connecting Separately Sold Add-ons and External Devices
Application Guide
 Integrating Separately Sold Accessories
You can expand your electronic drum kit with various accessories* for an even more enjoyable drumming experience.
(*: sold separately)
 Adding a tom to the [!4] jack
1.
Turn off the drum trigger module.
2.
Connect the XP125T-X to the [!4] jack.
3.
Turn on the drum trigger module.
4.
Choose the correct pad type for the
XP125T-X.
(TRIGGER/SETTING/Pad Type)
 Adding a cymbal to the [wTOM1/e]
jack
By attaching a commercially available Y-cable to the
[wTOM1/e] jack, you can connect an additional cymbal.
In that condition, those two pads connected to the same
jack function as single-piezo 1-zone pads.)
1.
Turn off the drum trigger module.
2.
Connect a commercially available Y-cable
and a pad to the [wTOM1/e] jack.
3.
Turn on the drum trigger module.
4.
Set the Pad Type to “PCY95AT.”
To split the trigger input, set the Input Mode to “sepa-
rate.”
(TRIGGER/SETTING/input mode)
The following describes how to connect a XP125T-X or a PCY95AT. For the information on the compatibility of
other pads, refer to the Pad Module compatibility table (PDF). https://download.yamaha.com/
OUTPUT
to DTX-PROX
XP125T-X
Stereo standard phone cable
(such as the included cable)
to DTX-PROX
XP105T-X
OUTPUT
PCY95AT
Y- c ab le
Stereo standard phone
cable (such as the
included cable)