Specifications

Panel Controls and Terminals
18
TYROS Owner’s Manual
■ Rear Panel & Connections
31 2 OUTIN OUTIN
VIDEO OUT
NTSC/ PAL
USB
MIDI A
MIDI BASSIGNABLE FOOT PEDAL
(VOLUME)(DSP VARIATION)(SUSTAIN)
TO RIGHT SPEAKER
MFC10
For installing an optional
set of speakers.
For installing the included
music rest.
See page 21.
See page 20.
• Since the TYROS has no built-in
speakers, you need to monitor its
sound output via external audio
equipment. Alternatively, you could
use a pair of headphones.
• Make sure that the POWER switch is in the OFF (extended)
position before making any connections. If you make con-
nections while the POWER switch is on, you risk damaging
external equipment such as the amp or speakers.
Air vent
• Do not place objects on the instrument's air vent,
since this may prevent adequate ventilation of the
internal components, and possibly result in the
instrument overheating.
• The TYROS’ default setting for
the external television/video
monitor signal is “PAL.” Depend-
ing on your particular locale, the
standard may be different and
the setting should be changed
accordingly. (For example, NTSC
is generally used in North Amer-
ica.) Check the standard used by
your television or video monitor,
and if it is not PAL, change the
setting in the VIDEO OUT display
to “NTSC” (page 151).
One or two optional Yamaha FC4 or FC5
footswitches connected to one of these
jacks can be used to control sustain and
a range of other important functions.
An optional Yamaha FC7 Foot Controller
connected to one of these jacks can be
used to control volume and a range of
other important functions.
See page 152.
You can connect the TYROS to a
television or video monitor to dis-
play the lyrics and chords in your
song data on a larger screen.
See page 151.
Connecting to a
computer via USB
See page 58
RCA pin plug VIDEO IN
The sophisticated MIDI functions give
you powerful tools to expand your music
performance and creation possibilities.
See page 148.
16