Specifications

Saving and Recalling Custom Panel Setups — Registration Memory
Quick Guide
53
TYROS Owner’s Manual
4 Go back to the Registration Memory Bank selection (Open/Save) display and
execute the Save operation.
Recalling a Registration Memory Setup
1 Press the [REGIST BANK] button to call up the Registration Memory Bank
selection (Open/Save) display.
2 Select a Registration Memory bank.
Selecting a Registration Memory bank is done in the same way as selecting a voice (page 26) or style
(page 32).
3 Press one of the green-lit numbered buttons in the Registration Memory sec-
tion.
■ Leaving certain parameters unchanged by Registration Memory
— Freeze function
....................................................................................................page 128
Registration Memory lets you recall all the TYROS panel settings you made with a single button press.
However, there may be times that you want certain parameters and settings to remain the same, even
when changing Registration Memory presets. For example, you may want to switch voices or effect
settings while keeping the same accompaniment style. This is where the Freeze function comes in
handy. It lets you maintain the settings of certain parameter groups and leave them unchanged, even
when selecting other Registration Memory buttons.
1 Select the parameter group you want left unchanged or “frozen” (page 128).
2 Turn the [FREEZE] button on.
3 Change the Registration Memory number.
■ Calling up Registration Memory numbers in order
— Registration Sequence
.....................................................................................page 128
As convenient as the Registration Memory buttons are, there may be times during a performance when
you want to quickly switch between settings — without having to take your hands from the keyboard.
By assigning a footswitch to control Registration Sequence, you can use your foot to step through the
Registration Memory presets — in the order you’ve specified.
1234567812345678
The pop-up window for entering the
name of the Registration Memory Bank
appears at the bottom of the display.
After entering the name, press the [OK]
LCD button (upper [8] button) to save
the bank name and eight panel setups to
the User drive.
For instructions on entering names,
see page 70.
FREEZE
REGIST.
BANK
MEMORY
REGISTRATION MEMORY
Confirm whether the correct
panel settings have been
called up or not.
51