Specifications

Recording Your Performances and Creating Songs — Song Recording
Quick Guide
57
TYROS Owner’s Manual
3 Make the desired panel settings for your keyboard performance.
(Refer to the list of possible settings in step #3 of Quick Recording
above.)
4 Start recording.
Recording is started in the same way as in Quick Recording.
5 Press the [REC] button to stop recording.
6 Listen to your newly recorded performance.
Press the [TOP] button so that the song playback position returns back to the top, then
press the SONG CONTROL [START/STOP] button.
7 If desired, record another channel.
Repeat steps #2 - #6 above.
8 Make sure to save the song data to the USER or FD drive when
recording is completed.
Call up the USER or FD page of the Song selection (Open/Save) display and execute
the save. For details, see step #8 on page 55.
Re-recording or editing the already-recorded song..............................
Here in the “Quick Guide,” you’ve learned how to create a new song by recording. The
following features of the Song Creator function allow you to re-record or edit the already-
recorded song.
Re-recording a specific section of the already-recorded song (Punch In/Out) .................... Page 94
Editing the recorded data for each channel
• Quantizing, or aligning the timing................................................................................ Page 96
• Deleting the data of the specified channel .................................................................. Page 96
• Mixing (Merging) the data of the specified two channels ............................................ Page 97
• Transposing the recorded note data of each channel................................................. Page 97
• Initial settings such as voice, volume, tempo and so on ............................................. Page 97
Editing the chord data by using the Event List..................................................................... Page 98
Editing the channel data by using the Event List ............................................................... Page 100
Editing the System Exclusive message data by using the Event List................................ Page 106
Editing the lyric data by using the Event List ..................................................................... Page 106
When recording without style play-
back, using the Metronome func-
tion (page 156) can make your
recording sessions much more
efficient.
START/
STOP
SYNC START
NEW SONG
REC TOP REW FF
START/
STOP
SYNC START
NEW SONG
START/
STOP
SYNC START
NEW SONG
REC TOP REW FF REC TOP REW FF
The recorded song will be lost if
you change another song or
you turn the power off without
executing the save operation in
step #8. Make sure to execute
the save operation in step #8.
55