Specifications
Folder/File Operations using the Open/Save Display
Basic Operations — Organizing Your Data
67
TYROS Owner’s Manual
Creating a New Folder
As your TYROS data library grows, you’ll want to organize it in various folders. This operation lets you create new folders on
the User, Floppy Disk and optional Hard Disk drives. The basic procedure is described below; for a specific example (using
Voices), see page 30 in the Quick Guide.
1 Call up the page (path) of the Open/Save display for which you wish to
create a new folder.
2 Press the [NEW] LCD button (lower [7] button) below the LCD display to
call up the pop-up window for entering the folder name.
3 Enter the name of the new folder. See page 70 for instructions on entering
names.
4 Press the [OK] LCD button (upper [7] button) to actually create the new
folder.
Selecting (Opening) a Folder/File
You can select a folder/file in two ways — by using the LCD letter buttons or by using the [DATA ENTRY] dial.
• On the User drive, folder directo-
ries can contain up to four levels.
The maximum total number of
files and folders which can be
stored is 3,200, but this may differ
depending on the length of the file
names.
On the User/FD (Floppy Disk)/HD
(optionally installed Hard Disk),
the maximum number of files
which can be stored in a folder will
be 250.
12345678
F
G
H
I
J
A
B
C
D
E
BACK NEXT
DATA ENTRY
ENTER
12345678
F
G
H
I
J
A
B
C
D
E
BACK NEXT
1 1
2 2
3
3
How to select a file using the LCD buttons
If there are more folders/files in
the drive than can be displayed
on a single page (the maximum
is ten), use these buttons to
select the additional pages.
Press the letter button corresponding
to the desired folder/file.
Turn the dial to select the
desired file/folder. (The selected
item is highlighted.)
Press the [ENTER] button to call
up the selected file.
How to select a file using the dial
• Double-clicking the appropriate [A] -[J] button calls up the corre-
sponding file and closes the Open/Save display.
Select a memory drive. Select a memory drive.
• Double-clicking the [ENTER] button calls up the corresponding file
and closes the Open/Save display.
65