Owner`s manual

INSTRUMENT AND CONTROL FUNCTIONS
3-20
3
NOTE:
● Make sure that the seat is properly
secured before riding.
● The seat height can be adjusted to
change the riding position. (See
page 3-20.)
EAU40970
Adjusting the seat height
The seat height can be adjusted to one
of two positions to suit the rider’s pref-
erence.
The seat height was adjusted to the
lower position at delivery.
To change the seat height to the
high position
1. Remove the seat. (See page
3-19.)
2. Remove the seat height position
adjuster by pulling it upward.
3. Move the seat holder cover to the
lower position as shown.
4. Install the seat height position ad-
juster so that the “H” mark is
aligned with the match mark.
1. Projection
2. Seat holder
1. Low position
2. High position
1. Seat height position adjuster
1. Seat holder cover
U5P5E0E0.book Page 20 Tuesday, March 21, 2006 12:00 PM