Owner`s manual

PERIODIC MAINTENANCE AND ADJUSTMENT
7-38
7
EAU27003
Replacing a rear turn signal
light bulb or a tail/brake light
bulb
1. Remove the passenger seat. (See
page 4-16.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the passenger seat.
EAU24313
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
2. Remove the license plate light bulb
socket (together with the bulb) by
pulling it out.
1. Turn signal light bulb socket
2. Tail/brake light bulb socket
1. Screw
2. License plate light unit
U1CY10E0.book Page 38 Wednesday, November 18, 2009 2:21 PM