User Manual

Cable Clamp documentationFLX UC 500 Cable Clamp
1
2
3
Use the cable clamp to secure the cables connected
to the UC products and support that they are not
unintentionally removed.
(1) Place the bottom part of the cable clamp into the
cable cavity of the UC unit before connecting the
cables. (2) Once the power and USB cables are
connected and fit into the respective areas of the
cable clamp, (3) place the second part of the cable
clamp on top, and fasten the clamp using the two
screws included with the kit.
Copyright 2018 Yamaha Unified Communications, Inc.
Yamaha Unified Communications, Inc.
144 North Road #3250
Sudbury, MA 01776 USA
[phone]
[e-mail]
Yamaha UC EMEA
190 High Street Tonbridge, Kent
TN9 1BE, UK
[phone]
[e-mail]
Yamaha UC APAC
+852.8108.8820
[e-mail]
Copyright 2018 Yamaha Unified Communications, Inc.
Yamaha Unified Communications, Inc.
144 North Road #3250
Sudbury, MA 01776 USA
[phone]
[e-mail]
Yamaha UC EMEA
190 High Street Tonbridge, Kent
TN9 1BE, UK
[phone]
[e-mail]
Yamaha UC APAC
+852.8108.8820
[e-mail]