1. Device Volume: The volume output from
the UC 500 is dependent on the
computer volume and device volume up
and down cap touch buttons. Volume is
increased using the cap-touch button on
the top left of the device. Touch this icon
on the base unit or touch and hold to
increase the volume. A tone will play to
indicate the volume level as it increases.
A double tone will play once maximum
volume is reached. Volume is decreased
using the button on the top right of the device. Touch this icon on the base unit or touch and hold to
decrease the volume. A tone will play to indicate the volume level as it is being decreased. A
double tone will play once minimum volume is reached.
2. Mute/Unmute: The microphones will be muted when this button is touched. Press the button again
to unmute. Red LEDs indicate muted microphones. Green LEDs indicate unmuted microphones.
3. Accept Call: To accept a call from the unit, touch this button.*
4. Hang Up Call: To hang up a call from the unit, touch this button.*
*Accept Call & Hang Up Call button functionality only available for use with compatible software
configured with the Revolabs FLX UC Device Manager: Refer to Item 6 in the Connecting your UC 500
section for instructions on how to download the software application.
Hang Up Call